Hunter Sprinkler Manifold 5 Zone Standard Kit with Integrated Winterisation Drainage (Including 1x Drip Zone)
Hunter sprinkler manifold 5 zone standard hybrid irrigation kit with a specialized drip zone and an integrated winterisation drainage system is engineered to elevate your custom multi-zone distribution layouts. Perfectly configured for premium properties requiring mixed watering types, this heavy-duty dual-purpose hub simultaneously drives high-pressure lawn sprinklers and low-pressure micro-irrigation lines from one balanced core unit. **To eliminate transit shifting and protect every molded high-impact thread from cracking, all professional components are dispatched loose in an un-assembled state**, allowing effortless, custom-tailored self-assembly on-site.
This upgraded setup features a dedicated **Winterisation / Compressed Air Blow-Out Kit**, empowering you to completely purge moisture from your subterranean network before seasonal ground freezes occur, shielding your solenoid coils and valve bodies from costly frost fractures.
⚠️ IMPORTANT KIT & INSTALLATION NOTE FOR THE CUSTOMER:
This product is a dedicated self-assembly kit and is NOT dispatched pre-built. All professional components are delivered loose to avoid severe courier transport damage and splitting.
Additionally, your dedicated drip line section requires precise pressure reduction. If your mainline pressure exceeds the safe threshold for thin-walled drip pipes, you must purchase the adjustable Hunter Accu-Sync Pressure Valve Regulator (Model: AS-ADJ) as an optional add-on. This module screws directly into the Hunter PGV solenoid valve to safely drop line pressures before water enters the micro-discharge loops.
Package Contents / Complete Components List:
This professional 5-zone symmetrical self-assembly kit includes brand-new, trade-grade components sourced from leading irrigation manufacturers, ready for your on-site compilation:
- 5x Hunter PGV 101 1″ Female Solenoid Valve with Flow Control (24V AC Coil)
- 1x 4-Way Swivel Manifold Female 1″ BSP
- 1x 2-Way Swivel Manifold / Tee Configuration Node
- 3x Swivel Female / Male Elbow 1″ x 1″ BSP
- 1x Nipple 1″ to 1/2″
- 1x Heavy-Duty Main Isolation Ball Valve 1″ with Blue Handle
- 1x Miniature Compressor Isolation Ball Valve with Red Handle
- 4x Compression Male Adaptor 25-1″ (Blue Cap Outlets for Sprinkler Zones)
- 1x Dedicated Low-Flow Drip Zone Compression Outlet Line Adapter
- 1x Compression Mainline Connector 25mm (Inlet Base)
- 5x Nipple 1″ BSP Male to 1″ BSP Male
- 1x Eitan Plastic Disk Filter Male-Male Thread 1″
- 1x Brass Euro-Style Compressor Quick-Release Air Coupling Fitting
- 1x PTFE Thread Seal Tape – Roll of 12 Metres (1/2″)
Symmetrical Parallel Branching for Maximum Pressure Integrity
Subterranean multi-valve plumbing arrays routinely endure static tension, sharp hydraulic spikes, and high-moisture valve box environments. This professional system utilizes advanced Tavlit swivel manifold mechanics paired with robust compression couplers, facilitating seamless, tool-free valve maintenance down the line without altering any main pipe runs. By centering five high-efficiency Hunter solenoid valves in an inline parallel cluster, this layout maintains perfectly balanced water volume, minimizing dynamic pressure loss across all 5 active zones.
Why This Professional Hybrid Kit is the Professional Benchmark:
- Zero Sourcing Hassle: Includes all necessary fittings, nipples, valves, professional thread sealing tape, and a dedicated winter drainage point in a single package—no missing parts on-site.
- Versatile Hybrid Output Paths: Clever architectural engineering bridges the gap between high-volume spray head paths and a precision low-flow dripline matrix.
- Weatherproof Structural Integrity: Moulded from premium, high-impact polypropylene and PVC composites that resist winter frost stress, mineral scale deposits, and liquid fertilizer corrosion.
- Integrated Winterisation Port: Eliminates the need to dismantle the manifold every autumn. Simply connect a standard workshop or mobile air compressor to the dedicated quick-release valve to clear out remaining water from all lines.
Product Specifications:
- Manifold System Build: 5-Zone Automatic Distribution Array with Winterisation Blow-Out Port (Self-Assembly Kit)
- Zone Distribution: 4 Symmetrical High-Flow Sprinkler Zones + 1 Dedicated Drip Line Zone
- Solenoid Valve Brand: Hunter Industries (USA)
- Main Inlet / Zone Outlet Ports: 1″ BSP Threaded Connections / 25mm Compression Mainline Link
- Working Pressure Capability: Rated up to PN10 (10 Bar / 145 PSI) with optimum structural control
Assembly & Installation Advice:
To ensure a completely leak-free setup, wind the included 12-meter PTFE thread sealing tape neatly around all male BSP threads. Piece together the Tavlit swivel connectors and elbow fittings into the multi-tier pattern shown in your documentation—the internal pre-fitted rubber gaskets establish a robust, waterproof union without over-torquing. Position the winterisation block directly between the inline disk filter and the main blue-handled isolator valve, utilizing the reduction element where required. Mount the Hunter PGV valves firmly, verifying that the molded directional water flow arrows face outward toward your zone lines, taking care to link your micro-drip network to its designated zone branch. Seat your completed plumbing cluster over a deep gravel drainage bed inside a heavy-duty box enclosure to avoid standing groundwater saturation and preserve your 24V AC field wiring paths.
Lawn Watering Irrigation Solutions
Enjoy the time-saving benefits of an irrigation system! This sprinkler manifold kit is ideal for mounting to the wall next to the irrigation controller or can be placed directly inside the Valve Box.

Reviews
There are no reviews yet.