Hunter Sprinkler Manifold 5 Zone Standard Kit with Integrated Winterisation Drainage
Hunter sprinkler manifold 5 zone standard irrigation kit with an integrated winterisation drainage system helps you optimize your automated multi-zone distribution layouts. This premium, installer-grade 5-zone manifold system is engineered to safely house all core pipeline essentials in a single, well-balanced package. Specially optimized for high-pressure, uniform lawn sprinkler configurations, micro-sprays, and impact heads, this robust hub maximizes fluid dynamics while grouping key irrigation nodes together. **To eliminate transit shifting and protect every molded high-impact thread from cracking, all professional components are dispatched loose in an un-assembled state**, allowing effortless, custom-tailored self-assembly on-site.
This upgraded setup features a dedicated **Winterisation / Compressed Air Blow-Out Kit**, empowering you to completely purge moisture from your subterranean network before seasonal ground freezes occur, shielding your solenoid coils and valve bodies from costly frost fractures.
📦 COMPONENT KIT INFO & SHIPPING DETAIL:
This product is a dedicated self-assembly kit and is NOT dispatched pre-built. All professional components are delivered loose to avoid severe courier transport damage and splitting.
This is the standard all-sprinkler configuration. If you require a specialized layout featuring integrated micro-filtration and pressure regulation for a low-flow drip line, please see our dedicated Drip Line Manifold variation instead.
Package Contents / Complete Components List:
This professional 5-zone symmetrical self-assembly kit includes brand-new, trade-grade components sourced from leading irrigation manufacturers, ready for your on-site compilation:
- 5x Hunter PGV 101 1″ Female Solenoid Valve with Flow Control (24V AC Coil)
- 1x 4-Way Swivel Manifold Female 1″ BSP
- 1x 2-Way Swivel Manifold / Tee Configuration Node
- 3x Swivel Female / Male Elbow 1″ x 1″ BSP
- 1x Nipple 1″ to 1/2″
- 1x Heavy-Duty Main Isolation Ball Valve 1″
- 1x Miniature Compressor Isolation Ball Valve with Red Handle
- 5x Compression Male Adaptor 25-1″ (Blue Cap Base Outlets)
- 1x Compression Mainline Connector 25mm (Inlet Base)
- 5x Nipple 1″ BSP Male to 1″ BSP Male
- 1x Eitan Plastic Disk Filter Male-Male Thread 1″
- 1x Brass Euro-Style Compressor Quick-Release Air Coupling Fitting
- 1x PTFE Thread Seal Tape – Roll of 12 Metres (1/2″)
Symmetrical Parallel Branching for Maximum Pressure Integrity
Subterranean multi-valve plumbing arrays routinely endure static tension, sharp hydraulic spikes, and high-moisture valve box environments. This professional system utilizes advanced Tavlit swivel manifold mechanics paired with robust compression couplers, facilitating seamless, tool-free valve maintenance down the line without altering any main pipe runs. By centering five high-efficiency Hunter solenoid valves in an inline parallel cluster, this layout maintains perfectly balanced water volume, minimizing dynamic pressure loss across all 5 active zones.
Why This Professional All-Sprinkler Kit is the Professional Benchmark:
- Zero Sourcing Hassle: Includes all necessary fittings, nipples, valves, professional thread sealing tape, and a dedicated winter drainage point in a single package—no missing parts on-site.
- Full-Flow Symmetrical Paths: Free-flowing internal architecture delivers un-restricted water volumes, making it ideal for running multi-head pop-up zones.
- Weatherproof Structural Integrity: Moulded from premium, high-impact polypropylene and PVC composites that resist winter frost stress, mineral scale deposits, and liquid fertilizer corrosion.
- Integrated Winterisation Port: Eliminates the need to dismantle the manifold every autumn. Simply connect a standard workshop or mobile air compressor to the dedicated quick-release valve to clear out remaining water from all lines.
Product Specifications:
- Manifold System Build: 5-Zone Automatic Distribution Array with Winterisation Blow-Out Port (Self-Assembly Kit)
- Solenoid Valve Brand: Hunter Industries (USA)
- Zone Allocation Profile: 5 Identical High-Flow Symmetrical Sprinkler Zones
- Main Inlet / Zone Outlet Ports: 1″ BSP Threaded Connections / 25mm Compression Mainline Link
- Working Pressure Capability: Rated up to PN10 (10 Bar / 145 PSI) with optimum structural control
Assembly & Installation Advice:
To ensure a completely leak-free setup, wind the included 12-meter PTFE thread sealing tape neatly around all male BSP threads. Piece together the Tavlit swivel connectors and elbow fittings into the multi-tier pattern shown in your documentation—the internal pre-fitted rubber gaskets establish a robust, waterproof union without over-torquing. Position the winterisation block directly between the inline disk filter and the main blue-handled isolator valve. Mount the Hunter PGV valves firmly, verifying that the molded directional water flow arrows face outward toward your blue-capped zone lines. Seat your completed plumbing cluster over a deep gravel drainage bed inside a heavy-duty box enclosure to avoid standing groundwater saturation and preserve your 24V AC field wiring paths.
Lawn Watering Irrigation Solutions
Enjoy the time-saving benefits of an irrigation system! This sprinkler manifold kit is ideal for mounting to the wall next to the irrigation controller or can be placed directly inside the Valve Box.

Reviews
There are no reviews yet.