The tee compression coupling 32mm elysee is a professional-grade, commercial-spec plumbing and irrigation fitting engineered to split a 32mm MDPE or HDPE water line at a perfect 90-degree angle. Designed specifically for high-flow installations, larger domestic watering networks, and agricultural supply lines, this heavy-duty equal tee compression coupling delivers an incredibly secure, high-volume connection that stands up to demanding field conditions.

Built to a trade-preferred PN10 pressure rating, this equal 3-way fitting safely handles continuous system working pressures of up to 10 bar. It is constructed from premium UV-stabilised materials engineered to resist structural fracturing during sub-zero British winters and avoid brittleness under intense summer sunlight, making it equally suited for deep underground burial or exposed above-ground layouts across the UK.

Why Choose the Elysee 32mm Equal Tee Compression Coupling?

Professional irrigation engineers and commercial landscapers choose Elysee 32mm fittings because they eliminate the weak points, pressure drop, and weeping seals often associated with cheaper alternative brands.

• Fast Easy-Fit Assembly: Forget complex tools, gluing, or heating equipment. This 32mm equal tee features an intuitive push-fit assembly system. Simply slacken the compression nuts, push your 32mm MDPE or HDPE pipe past the internal rubber O-rings until it firmly seats, and hand-tighten the assembly.
• Dynamic Pipe Grip Mechanics: The heavy-duty internal split-ring collets tightly clamp down onto the outer diameter of the poly pipe. This prevents pipe pull-out or blow-out failures caused by high-pressure pump surges, heavy water hammer, or ground movement.
• 100% Reusable Design: If your field layout, allotment zoning, or irrigation manifold layout changes next season, the fitting can be effortlessly unscrewed, removed, and repositioned elsewhere without damaging the pipe or the fitting components.

Primary Applications

This high-capacity 32mm equal tee compression coupling is a staple component for high-flow water management systems. It is most commonly used for:

• Splitting a main 32mm MDPE water supply line to create two independent high-volume distribution zones.
• Branching off a 32mm main header pipe to feed multi-valve manifold systems housed within professional underground valve boxes.
• Splicing into an existing 32mm underground pipe network to install agricultural water troughs, washdown points, or high-flow garden taps.
• Supplying water to large-scale commercial pop-up lawn sprinklers, sports turf watering systems, and nursery overhead spray lines.

How to Install Your 32mm Compression Tee Perfectly

To ensure a completely watertight, bulletproof seal with your new tee compression coupling 32mm elysee, follow these standard trade practices:

1. Ensure Square Cuts: Use a dedicated plastic pipe cutter to ensure the end of your 32mm MDPE pipe is perfectly square and free of jagged burrs. An angled cut can press unevenly against the gasket.
2. Chamfer the Outer Edges: Slightly bevel or chamfer the sharp outer edge of the pipe before insertion. This prevents the raw pipe edge from nicking, tearing, or slicing the internal O-ring seal.
3. Push Past the Seal: Push the pipe firmly past the initial point of resistance. This extra push ensures the pipe has successfully cleared the rubber sealing ring and is fully seated at the back of the fitting body.
4. The Final Tighten: Hand-tightening is typically sufficient for standard zones. For absolute peace of mind on high-pressure main lines or underground burials, apply a final quarter-turn using a dedicated compression fitting wrench.

Technical Specification

• Product Type: Equal 3-Way Tee Fitting (90-Degree)
• Fitting Connections: 32mm x 32mm x 32mm Compression Sockets (Accepts standard 32mm PE pipe at all three openings)
• Pressure Class Rating: PN10 / 10 Bar maximum continuous working pressure
• Material Composition: High-grade Polypropylene (PP-B) body with ultra-tough Polyacetal split-rings
• System Compatibility: Fully compatible with standard UK 32mm MDPE, HDPE, and IRS poly rur lines

Frequently Asked Questions (FAQ)

Do I need to insert a pipe liner or stiffener inside the 32mm pipe?
While Elysee’s grip ring provides immense mechanical hold on its own, installing an internal pipe liner (insert) is highly recommended for cold water mains pressure or deep underground installations to maintain perfect pipe roundness under load.

Can this 32mm tee be used for potable/drinking water lines?
Yes, Elysee compression fittings are manufactured from premium, non-toxic materials suitable for cold water distribution, making them safe for drinking water lines provided your pipe network meets local UK water regulations.