The commercial-grade Supreme Adaptor 25mm 1” Female Thread mechanical connector delivers a direct, high-volume fluid transition engineered to couple 25mm outer diameter MDPE pipework straight to full-bore one-inch male threaded infrastructure.
Primarily deployed as the structural anchor point where lateral irrigation supply lines interface directly with professional 1″ zone control valves, heavy-duty backflow preventers, or manifold distributor bars, this compression unit provides a permanent watertight link. Boasting an industrial **PN16 rating**, it safely manages continuous hydraulic system networks operating at pressures up to 16 Bar, protecting underground junction arrays from friction stress.
Technical Overview
| Product Class | Supreme Commercial Series |
|---|---|
| Joint Configuration | Straight Compression Socket x Female Parallel Thread |
| Inlet Size (MDPE) | 25 mm (For standard high-density polyethylene pipelines) |
| Outlet Thread Size | 1” Female Thread (Standard Parallel BSP) |
| Max Pressure Class | PN16 / 16 Bar (Certified for agricultural mainlines) |
| Body Compounding | Stabilised Polypropylene Block Copolymer (PP-B) |
Operational Integrity Benefits
- Full-Bore Flow Design: The spacious 1″ inner chamber guarantees maximum fluid dynamics, keeping flow rates unhindered.
- Pre-Sealed Contact Ring: High-grade synthetic NBR rubber locks tight around the pipe, safeguarding against deep soil suction stress.
- Sunlight Degradation Block: Weatherproof copolymer housing entirely prevents material brittleness in open, unburied field systems.
Field Assembly Guidance
- Edge Preparation: Ensure the 25mm pipe is cut perfectly flush and clear of rough burrs to guarantee a smooth insert past the gasket.
- Threaded Connection: Apply commercial PTFE tape smoothly to the male matching thread to ensure a flush, leak-free seat.
- Fastening Method: Drive the pipe past the sealing ring and secure the blue outer lock-collar down firmly by hand to lock the fitting.

Reviews
There are no reviews yet.