Supreme 32mm x 1/2″ Female Thread Tee

Facilitate precise, high-pressure sub-mainline splicing with the commercial-grade Supreme 32mm x 1/2″ Female Thread Tee. Specially engineered for wide-scale water distribution, this professional compression block enables you to split a 32mm supply line while introducing a compact 1/2″ female BSP interface. It is the perfect mechanical solution for linking up localized drip feeds, auxiliary drain points, or automated sensor units.

Industrial Protection for Buried Mainlines

Large-diameter 32mm irrigation pipelines operate under continuous mechanical load and seasonal ground movement. This Supreme female tee is manufactured from virgin, high-impact polypropylene copolymer that easily cushions intense hydraulic shocks and resists sub-zero British ground frosts. Fully UV-stabilised and chemical-resistant, it delivers a decades-long leakproof barrier whether direct-buried deep in soil or exposed to continuous summer heat waves.

Why This 32mm x 1/2″ Female Supreme Tee is Essential:

• Precise Reducing Port: Seamlessly transitions 32mm MDPE or LDPE water supply pipelines down to a centered 1/2″ Female BSP thread.
• Commercial Pressure Spec: Extensively tested and approved for high-pressure networks operating up to PN16 (16 Bar / 232 PSI).
• High-Torque Grip: Ergonomically shaped interlocking caps secure a completely stable mechanical joint using simple hand-tightening.
• Smooth Bore Profile: Optimized internal core walls eliminate fluid resistance and turbulence across the water diversion.

Product Specifications:

• Brand: Supreme Irrigation (Quapus sa srl)
• Manufacturer Part Number (MPN): S095032012
• Junction Profile: 3-Way Reducing Compression Tee
• Pipe Socket Diameter: 32mm (Inlet and Outlet ends)
• Thread Layout: 1/2″ Female BSP Thread
• Material Base: Virgin Polypropylene Copolymer (PP-B)

Professional Installation Checklist:

To establish an absolute leak-free system under pressure, verify that your 32mm pipe is cut clean and perfectly square before pushing it past the sealing rings. When spinning a male plumbing fixture into the 1/2″ female connection, pre-wrap the male thread with a few tight layers of high-density PTFE tape. Secure firmly by hand to shield the internal molded threads from stripping.