Watering Pipe LDPE – 16mm x 100m Black

Typical pipe with an external diameter of 16mm. Fits all the fittings in our shop with a diameter of 16 mm.

• LDPE Pipe for Garden Irrigation
  The rigid wall structure of LDPE pipe maintains its surface integrity with minimal risk of fraying when installing micro-irrigation emitters into the sidewall via a 4mm hole. Unlike garden hose, LDPE promises maximum protection against leakage around the installation site.
• Uses for LDPE Pipe
  The branched molecular structure of irrigation hose enables a rigid yet partly flexible construction easily worked with when building a fully customisable irrigation pipe layout. The smooth internal surface not only reduces the risk of algae formation but also allows water to flow freely even at low pressures enabling emitters to run at their optimal level. Its structure is suitably designed to be installed on the surface or 15cm below – ideal for discreetly disguising pipe under decorative bark or when supplying a low-volume sprinkler system.
• Garden Watering Irrigation System
  Use LDPE pipe as part of a garden irrigation system when distributing water to pots, containers, vineyards, orchards, garden beds and borders or around the perimeter of a greenhouse. To maximise water flow efficiency, the pipe must be uncoiled correctly on a warm, sunny day as this makes the pipe easier to handle and less likely to kink. Unravel the pipe in a straight line weighing each end down with a brick and leave for one hour.

Watermil irrigation pipes:

🌞 are made from the best raw materials with a UV-protective stabiliser,
💪 have high flexibility and increased mechanical resistance, so they are easily and quickly laid in the field,
🌱 are resistant to biological and chemical agents,
🔍 they give low flow resistance thanks to their smooth internal surfaces,
🔝 they connect very well through screwed, pressed and threaded connections,
🔄 can be recycled.

Check out our range of Watermil irrigation pipes!