The industrial-grade Hansen Tank Connector 4” Male x Female bulkhead flange delivers a maximum-capacity, massive-bore straight transition engineered to establish master-flow fluid ports in structural liquid containment storage.
Primarily deployed as an industrial master drain-off outlet, primary ultra-high-capacity pump suction intake, or oversized multi-tank linking connector, this genuine 4″ tank fitting provides a wide, completely unhindered fluid path. Manufactured by Hansen Products from premium, raw fiberglass-reinforced nylon composite, it allows installers to clamp external 4″ pipelines securely through structural tank walls without risking structural localized body splits or fluid weeping under heavy volumetric head pressure.
Technical Overview
| Brand / Authenticity | Genuine Hansen Products (New Zealand) |
|---|---|
| Fitting Configuration | Straight Mechanical Bulkhead / Master Tank Flange Connector (Male x Female) |
| Thread Dimensions | 4” Male BSP Outer Thread x 4” Female BSP Inner Thread |
| Pressure Integrity | PN16 / 16 Bar (Certified for heavy-duty commercial pumping networks) |
| Material Composition | Raw Fiberglass Reinforced Nylon (High-Impact & Frost Protection) |
Structural Performance Merits
- Maximum Volumetric Flow: The expansive 4″ inner chamber guarantees ultimate fluid dynamics, keeping flow rates completely unhindered during heavy pump operations.
- Anti-Twist Thread Design: Uniquely engineered left-hand thread structure on the backing nut prevents the connector from loosening when external pipework is screwed in.
- Extreme Environmental Guard: UV-stabilised reinforced nylon composite resists underground chemical decay, deep frost, and scorching summer sunlight.
Field Assembly Guidance
- Hole Preparation: Drill a clean, smooth-edged pilot clearance hole through the fluid tank wall using a standard holesaw matched to the outer thread body diameter.
- Sealing Alignment: Ensure the heavy-duty sealing washer sits flush on the inside wall or dry face of the tank partition before drawing down the back nut.
- Tightening Action: Spin the back nut down firmly to compress the rubber flange. Avoid extreme mechanical torque past standard gasket compression parameters.


Reviews
There are no reviews yet.