Create rock-solid three-way branches across your drip irrigation layouts with the heavy-duty 16mm nutlock equal tee (16mm x 16mm x 16mm). Engineered specifically for 16mm outer diameter LDPE supply pipe and commercial dripline, this high-grip compression tee combines an internal barbed spigot with external locking collars that clamp firmly over the pipe wall. Unlike standard friction-fit barbed fittings that can weep or blow off during warm weather or pump pressure spikes, the nutlock mechanism ensures a secure, reusable seal across gardens, glasshouses, and commercial nurseries in the UK. Ideal for low-pressure micro-irrigation, border watering, and polytunnel drip networks.
Heavy-Duty 16mm x 16mm x 16mm Nutlock Barbed Equal Tee for LDPE & Dripline
Upgrade the reliability of your micro-irrigation pipework by choosing the 16mm Nutlock Equal Tee. Favoured by landscape contractors, professional gardeners, and commercial growers, this three-way junction fitting splits a single 16mm feed line into two 90-degree lateral branches without requiring pipe clamps, ratchet clips, or solvent adhesives.
Installation is fast and straightforward on-site: simply back off the three threaded locking nuts, push your 16mm LDPE pipe or dripline firmly over the precision-moulded barbs, and wind the collars back up until they lock the tubing tightly against the body. If you ever need to alter your planting beds or flush out the end of a line, the nuts can be unscrewed and reused repeatedly without damaging the tubing.
Key Features & Benefits
- Secure Nutlock Compression Grip: Threaded locking collars mechanically clamp the 16mm tubing onto the internal barbs, preventing blow-offs caused by summer heat expansion or pressure surges.
- Universal 16mm OD Compatibility: Precision-engineered to fit standard 16mm outer diameter LDPE supply pipe, plain tubing, and integrated 16mm dripline (1.0mm to 1.2mm wall thickness).
- Tool-Free Assembly & Reusability: Installs rapidly by hand with no need for jubilee clips, heat guns, or specialist crimping tools, and can be dismantled cleanly for layout adjustments.
- UV-Stabilised Acetal / Polypropylene Body: Formulated to withstand prolonged direct sunlight, frost cycles, and outdoor exposure without cracking or becoming brittle.
- Chemical & Fertigation Resistant: Completely unaffected by soluble liquid fertilisers, greenhouse feeds, and hard water mineral deposits.
- Smooth Internal Bore: Minimises turbulence and friction loss at the tee junction to keep emitter flow rates balanced across your entire zone.
Typical Applications
- Splitting 16mm LDPE mainline runs into lateral dripline rows in flower beds and borders
- Commercial polytunnel, glasshouse, and nursery pot-watering distribution grids
- Vegetable plots, raised beds, hedgerow drip lines, and orchard irrigation networks
- Green roofs, vertical living walls, and residential landscape micro-irrigation systems
Technical Specifications
| Product Type | Nutlock Equal Tee (3-Way Barbed Compression Tee) |
|---|---|
| Connection Sizes | 16mm x 16mm x 16mm (Fits 16mm OD Pipe / Dripline) |
| Pipe Compatibility | 16mm OD LDPE Supply Pipe & 16mm Dripline (13.6mm–14mm ID) |
| Locking Mechanism | Barbed Spigot with Threaded External Locking Nuts |
| Operating Pressure | Up to 4 Bar (Ideal for Low-Pressure Drip & Micro-Irrigation) |
| Material | UV-Stabilised Engineering Polymer (Black / Green or Black Nuts) |

Reviews
There are no reviews yet.