Hunter Sprinkler Manifold 3 Zone Standard Kit with Integrated Winterisation Drainage
Hunter sprinkler manifold 3 zone standard irrigation kit with an integrated winterisation drainage system helps you optimize your automated multi-zone distribution layouts. This premium, installer-grade 3-zone manifold system is engineered to safely house all core pipeline essentials in a single, well-balanced package. Specially optimized for high-pressure, uniform lawn sprinkler configurations, micro-sprays, and impact heads, this robust hub maximizes fluid dynamics while grouping key irrigation nodes together. **To eliminate transit shifting and protect every molded high-impact thread from cracking, all professional components are dispatched loose in an un-assembled state**, allowing effortless, custom-tailored self-assembly on-site.
This upgraded setup features a dedicated **Winterisation / Compressed Air Blow-Out Kit**, empowering you to completely purge moisture from your subterranean network before seasonal ground freezes occur, shielding your solenoid coils and valve bodies from costly frost fractures.
📦 COMPONENT KIT INFO & SHIPPING DETAIL:
This product is a dedicated self-assembly kit and is NOT dispatched pre-built. All professional components are delivered loose to avoid severe courier transport damage and splitting.
This is the standard all-sprinkler configuration. If you require a specialized layout featuring integrated micro-filtration and pressure regulation for a low-flow drip line, please see our dedicated Drip Line Manifold variation instead.
Package Contents / Complete Components List:
This professional 3-zone symmetrical self-assembly kit includes brand-new, trade-grade components sourced from leading irrigation manufacturers, ready for your on-site compilation:
- 3x Hunter PGV 101 1″ Female Solenoid Valve with Flow Control (24V AC Coil)
- 1x 3-Way Swivel Manifold Female 1″ BSP
- 1x End Cap 1″ BSP Female (Blanking Cap for Manifold Extension)
- 1x 2-Way Swivel Manifold / Tee Configuration Node
- 3x Swivel Female / Male Elbow 1″ x 1″ BSP
- 1x Nipple 1″ to 1/2″
- 1x Heavy-Duty Main Isolation Ball Valve 1″ with Blue Handle
- 1x Miniature Compressor Isolation Ball Valve with Red Handle
- 3x Compression Male Adaptor 25-1″ (Black Heavy-Duty Outlets for Sprinkler Zones)
- 1x Compression Mainline Connector 25mm (Inlet Base)
- 3x Nipple 1″ BSP Male to 1″ BSP Male
- 1x Eitan Plastic Disk Filter Male-Male Thread 1″
- 1x Brass Euro-Style Compressor Quick-Release Air Coupling Fitting
- 1x PTFE Thread Seal Tape – Roll of 12 Metres (1/2″)
Symmetrical Parallel Branching for Maximum Pressure Integrity
Underground plumbing matrices operating under cyclic hydraulic stress require incredible build durability. By utilizing premium Tavlit swivel unions linked with heavy-duty compression fittings, this infrastructure loop enables instantaneous, non-destructive valve removal down the line without needing to alter your core lateral trenches. Centering three high-performance Hunter solenoid valves within an inline parallel configuration ensures highly balanced flow dynamics and minimizes raw friction losses across all connected sub-zones.
Why This Professional All-Sprinkler Kit is the Professional Benchmark:
- Zero Sourcing Hassle: Includes all necessary fittings, nipples, valves, professional thread sealing tape, and a dedicated winter drainage point in a single package—no missing parts on-site.
- Full-Flow Symmetrical Paths: Free-flowing internal architecture delivers un-restricted water volumes, making it ideal for running multi-head pop-up zones.
- Weatherproof Structural Integrity: Moulded from premium, high-impact polypropylene and PVC composites that resist winter frost stress, mineral scale deposits, and liquid fertilizer corrosion.
- Integrated Winterisation Port: Eliminates the need to dismantle the manifold every autumn. Simply connect a standard workshop or mobile air compressor to the dedicated quick-release valve to clear out remaining water from all lines.
Product Specifications:
- Manifold System Build: 3-Zone Automatic Distribution Array with Winterisation Blow-Out Port (Self-Assembly Kit)
- Zone Distribution: 3 Symmetrical High-Flow Sprinkler Zones
- Solenoid Valve Brand: Hunter Industries (USA)
- Main Inlet / Zone Outlet Ports: 1″ BSP Threaded Connections / 25mm Compression Mainline Link
- Working Pressure Capability: Rated up to PN10 (10 Bar / 145 PSI) with optimum structural control
Assembly & Installation Advice:
To secure an absolutely airtight seal across all parallel connections, wrap the provided 12-meter PTFE sealing tape tightly clockwise around each exposed male thread. Group your Tavlit swivel sections and multi-directional joints into the exact split-level sequence outlined in your manual—the embedded compression gaskets lock tight without needing heavy hand tools. Install the primary marine-grade blow-out block immediately downstream of the inline disk filter but upstream of the main blue-handled isolator tap. Secure the Hunter PGV valves firmly, ensuring the directional molding arrows align toward your lateral outlets, and tightly seal the final branch end using the provided 1″ female blanking cap. Set your assembled control cluster on a deep gravel sub-base inside a heavy-duty box enclosure to facilitate smooth water drainage and prevent moisture build-up around the 24V AC power leads.

Reviews
There are no reviews yet.