The industrial-grade Hansen Tank Connector 1-1-4” Male x Female bulkhead flange delivers an oversized, ultra-high-volume straight transition engineered to establish secure, maximum-flow fluid ports in structural liquid containment storage.
Primarily deployed as a master industrial drain-off port, primary high-capacity pump suction intake, or oversized multi-tank linking connector, this genuine 1 1/4″ tank fitting provides an unrestricted, wide fluid path. Manufactured by Hansen Products from premium, raw fiberglass-reinforced nylon composite, it allows installers to clamp external 1 1/4″ pipelines securely through structural tank walls without risking localized body splits or fluid weeping under heavy volumetric pressure.
Technical Overview
| Brand / Authenticity | Genuine Hansen Products (New Zealand) |
|---|---|
| Fitting Configuration | Straight Mechanical Bulkhead / Tank Flange Connector (Male x Female) |
| Thread Dimensions | 1 1/4” Male BSP Outer Thread x 1 1/4” Female BSP Inner Thread |
| Pressure Integrity | PN16 / 16 Bar (Certified for heavy-duty commercial pumping networks) |
| Material Composition | Raw Fiberglass Reinforced Nylon (High-Impact & Frost Protection) |
Structural Performance Merits
- Expanded Volumetric Aperture: The spacious 1 1/4″ inner chamber guarantees maximum fluid dynamics, keeping flow rates completely unhindered during heavy commercial operations.
- Anti-Twist Thread Design: Uniquely engineered left-hand thread structure on the backing nut prevents the connector from loosening when external pipework is screwed in.
- Extreme Environmental Guard: UV-stabilised reinforced nylon composite resists underground chemical decay, deep frost, and scorching summer sunlight.
Field Assembly Guidance
- Hole Preparation: Drill a clean, smooth-edged pilot clearance hole through the fluid tank wall using a standard holesaw matched to the outer thread body diameter.
- Sealing Alignment: Ensure the heavy-duty sealing washer sits flush on the inside wall or dry face of the tank partition before drawing down the back nut.
- Tightening Action: Spin the back nut down firmly to compress the rubber flange. Avoid extreme mechanical torque past standard gasket compression parameters.


Reviews
There are no reviews yet.