The commercial Supreme Adaptor 25mm 1/2” Female Thread inline coupling serves as a specialized reduction link, specifically engineered to connect standard 25mm water mainlines directly to compact half-inch male threaded infrastructure.
Ideally deployed where robust lateral irrigation lines transition into smaller drainage components, monitoring units, or zone manifolds, this mechanical compression unit secures a dependable fluid-tight joint without demanding chemical bonding or heat fusion. Its high-density PN16 rating guarantees continuous operational safety at pressures reaching up to 16 Bar, protecting sub-surface assemblies from structural stress.
Technical Overview
| Product Class | Supreme Commercial Series |
|---|---|
| Joint Configuration | Straight Reducing Compression Compression x Female BSP Thread |
| Inlet Size (MDPE) | 25 mm (To fit identical outer diameter pipes) |
| Outlet Thread Size | ½” Female Thread (Parallel BSP) |
| Max Pressure Class | PN16 / 16 Bar (Suitable for continuous pumping networks) |
| Body Compounding | Stabilised Polypropylene Block Copolymer (PP-B) |
Operational Integrity Benefits
- Shock Absorption: Thick-walled material formulation actively counteracts surge impacts and temperature expansions.
- Pre-Sealed Contact Ring: Synthetic NBR rubber compound establishes a tight inner barrier, maintaining suction hold under ground stress.
- Sunlight Degradation Block: Weatherproof housing prevents long-term cracking when used in open, unburied farm environments.
Field Assembly Guidance
- Edge Preparation: Cut the 25mm pipeline perfectly square and remove sharp external edges to ensure a smooth glide into the seal.
- Threaded Connection: Wind commercial thread sealing fiber around the male counterpart prior to tightening to lock the connection.
- Fastening Method: Push the pipe home past the gasket, then tighten the blue outer lock-collar by hand to secure the internal grip.

Reviews
There are no reviews yet.