The commercial-grade Supreme Adaptor 16mm 1/2” Female Thread coupling provides an ultra-reliable, straight mechanical transition engineered to connect 16mm outer diameter polyethylene pipelines directly to half-inch male threaded components.
Perfectly suited for micro-irrigation zones, drip system mainlines, and low-volume agricultural water distribution, this premium compression adaptor forms an immediate, high-pressure joint without requiring solvent welding or glue. Featuring a heavy-walled **PN16 rating**, it is fully certified to withstand continuous fluid pressures of up to 16 Bar, guaranteeing absolute structural longevity in buried trenches or above-ground arrays.
Technical Specifications
| Product Range | Supreme Compression Series |
|---|---|
| Fitting Configuration | Straight Mechanical Socket x Female Threaded Adaptor |
| Pipe Connection | 16 mm (Outer Diameter) |
| Thread Dimension | ½” Female BSP Thread (1/2″ F) |
| Pressure Rating | PN16 (Rated for up to 16 Bar / 232 PSI) |
| Material Composition | High-Impact UV-Stabilised Polypropylene (PP-B) |
Advanced Technical Advantages
- Industrial 16 Bar Build: Engineered to withstand thermal expansion shocks, water hammer shifts, and rough backfilling forces.
- Captive Rubber NBR Seal: High-precision internal ring forms an airtight dry seal around the 16mm tubing, adapting to layout flex.
- Weatherproof Copolymer: Fully UV-stabilised structure prevents polymer brittleness or freeze-cracking over long seasonal runs.
Installation Best Practices
- Square Pipe Slicing: Ensure the 16mm pipe end is cut square and deburred cleanly to prevent nicking the internal rubber gasket.
- Thread Jointing: Apply standard PTFE tape evenly around the matching 1/2″ male thread to secure an optimal, watertight seal.
- Hand-Tight Mechanisation: Push the tube fully past the inner components and spin the distinct blue nut down by hand for a solid mechanical lock.

Reviews
There are no reviews yet.