Hunter MP 3500 Rotator Spray 90-210 st., 10,1-10,7m

The MP Rotator uses less water, and at the same time – thanks to the stream resistant to wind gusts – ensures more even surface irrigation than a traditional nozzle. The operation of the MP Rotator is not accompanied by the formation of fog generated at high pressure, while the multiple jet gives greater coverage and smaller doses than a single jet from a turbine sprinkler. In addition, it is more reliable with lower installation and operating costs than a turbine sprinkler. The MP Rotator, as a single nozzle, allows you to adjust the angle and radius of the spray. An internal mesh filter provides additional protection against nozzle clogging. An additional advantage is the ability to install all models (MP1000, MP2000, MP3000, MP3500 and MPCorner) in one zone, which gives great flexibility in the design of the irrigation system.

Specification

MP3500 models
90 – 210 cream
Water dose optimization tool
The patented technology allows for even coverage of the irrigated surface with water when dispensing small doses of water
Dosing small doses of water reduces problems related to its flow on slopes
The lower pressure allows for greater distances of the lines with sprinklers than in the case of traditional nozzles
Proven quality and reliability
Patented RotatorR technology and proven quality – since 1987
The only moving part
The “double-pop” function allows the nozzle to self-rinse when starting and stopping work
Functions
Actual precipitation adjustment with any arc or radius setting
The radius can be reduced to a maximum of 25% on all models
Color coding facilitates identification
The double-excursion function prevents debris from falling into the nozzle
The replaceable filter baffle prevents bulky items from clogging the nozzles
Low rainfall
Windproof multi-jet technology
Scope and radius adjustments ensure precise settings
Ratchet mechanism prevents damage when attempting to excessively reduce flux
The nozzles can only be adjusted when water is flowing
Working parameters
Recommended pressure: 2.75 bar (40 PSI)
Nozzle range: 10.1-10.7 m
Models can be adjusted while being fed with water